Jagruti Conveyor Belts Pvt. Ltd.
Conveyor Roller Manufacturer in Ahmedabad, Gujarat, India
The complete performance of the system depends on the quality of the conveyor rollers as they are in continuous contact with the belt.The main purpose of conveyor roller is to support the belt along with the material on carrying run, with minimum resistance. It also improves belt alignment.This product from conveyor roller manufacturer in Gujarat, India are made of high quality ERW Steel Tubes(SIZE AS PER IS :3601-1966) and En-8 Shafting to ensure performance and reliability. High quality bearings to meet the promised performance standard.
The conveyor rollers are also known as idler, idler set (comprising the whole set with support frame),roll, roller, idler roll or idler roller.
JAG Steel Roller:
JAG high quality steel conveyor rollers used on carrying side as well as return side.
The carrying side roller supports the belt carrying material supported on a groove shaped frame, forward inclined frame and transition frame. Conveyor Rollers manufacturers in India come with high quality bearings & multi-labyrinth seal. The roller is specially sealed to ensure optimum performance under the required condition.
Return sider rollers with equally spaced rubber rings removes scales on the belt due to uncertain surrounding condition. The rings are pointed, assembled at intervals, in the central part of the roller, where they have the scope to break up the scale which normally is present at the belt Centre; meanwhile flat rings mounted in groups at the extremities of the belt, support and protect the belt edges, also in cases of limited belt wandering.
Impact rollers are designed to withstand high amount of impact force near the loading point on the conveyor system. These rollers are normal steel rollers with outer roller surface covered with rubber rings to absorb the impact force & weight. Impact rollers absorbs most of the vibration and shock produced due to material loading on the system.
HDPE stands for High Density Polyethylene. HDPE are light weight and abrasion resistance compared to steel roller. This roller can withstand the corrosive environment as well as have a good load carrying capacity.
Clean-O-Track rollers are specially designed to clean the belt as well as it also keeps the belt in center for an optimum performance and increased belt life.